Operation site of Hunan pulp extrusion dewatering machine

Details

    The pulp dewatering machine is the most important mechanical equipment in the pulp dewatering process, mainly used for pre dewatering of medium pulp to meet later costs, with strong dewatering capacity, simple operation, large processing capacity, and durability. The pulp dewatering machine can be selected based on the physical characteristics of pulp, and the high-pressure roller press dewatering machine has stronger adaptability and is widely used in various high humidity pulp dewatering processes.

Performance Characteristics Comparison

    The pulp squeeze dewatering machine is a new generation of high-pressure roll press dewatering equipment developed independently by our company based on the long-term research and development of physical dewatering of pulp, combined with the latest technologies of similar industries at home and abroad. It integrates roll press dewatering. It successfully solved the problem of continuous and highly dried deep dewatering of pulp.

technological process

    The pulp is transported by the lottery pump to the material feeder of the high-pressure roller press dewatering machine, and evenly spread on the mesh belt through the spiral material feeder. At the same time, the thickness of the spread on the mesh belt is controlled. With the operation of the equipment, the mesh belt is clamped by two fully tensioned circular mesh belts on top and bottom. Under the drive of the driving roller, it is continuously mechanically and physically squeezed by the pre pressure dewatering zone and three sets of roller high-pressure zones to press out a large amount of water. Adjust the extrusion force according to the characteristics of the material to meet the customer's requirements for material moisture.